Cisco ASR 9000 Series Routing Configuration Guide

PurposeCommand or Action
Enables multiple adjacencies for different OSPF areas and
enters multi-area interface configuration mode
multi-area-interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-ospf)#
multi-area-interface Serial 0/1/0/3
Step 6
commit
Step 7
Configuring Label Distribution Protocol IGP Auto-configuration for OSPF
This task explains how to configure LDP auto-configuration for an OSPF instance.
Optionally, you can configure this feature for an area of an OSPF instance.
SUMMARY STEPS
1.
configure
2.
router ospf process-name
3.
mpls ldp auto-config
4.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enables OSPF routing for the specified routing process and places
the router in router configuration mode.
router ospf process-name
Example:
RP/0/RSP0/CPU0:router(config)# router
ospf 1
Step 2
The process-name argument is any alphanumeric string
no longer than 40 characters.
Note
Enables LDP IGP interface auto-configuration for an OSPF
instance.
mpls ldp auto-config
Example:
RP/0/RSP0/CPU0:router(config-ospf)# mpls
ldp auto-config
Step 3
•
Optionally, this command can be configured for an area of
an OSPF instance.
commit
Step 4
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
479
Implementing OSPF
Configuring Label Distribution Protocol IGP Auto-configuration for OSPF

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model