Cisco ASR 9000 Series Routing Configuration Guide

DETAILED STEPS
PurposeCommand or Action
Enters administration EXEC mode.admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 1
Enters Administrative configuration
mode.
configure
Example:
RP/0/RSP0/CPU0:router(admin)#configure
Step 2
Disables Selective VRF Download.no svd platform enable
Example:
RP/0/RSP0/CPU0:PE51_ASR-9010(admin-config)#no svd platform enable
Step 3
commit
Step 4
Displays Selective VRF download
feature state information.
show svd state
Example:
RP/0/RSP0/CPU0:router#show svd state
Selective VRF Download (SVD) Feature State:
Step 5
SVD Configuration State Unsupported
SVD Operational State Unsupported
Enters administrator mode.admin
Example:
RP/0/RSP0/CPU0:router#admin
Step 6
Reloads the chassis.reload location all
Example:
RP/0/RSP0/CPU0:router(admin)#reload loc all
Tue Feb 12 07:51:25.279 UTC
Step 7
Preparing system for backup. This may take a few minutes especially
for large
configurations.
Status report: node0_RSP0_CPU0: START TO BACKUP
Status report: node0_RSP0_CPU0: BACKUP HAS COMPLETED
SUCCESSFULLY
[Done]
Proceed with reload? [confirm]RP/0/RSP0/CPU0::This node received
reload
Exits administrator mode and enters
EXEC mode.
exit
Example:
RP/0/RSP0/CPU0:router(admin)#exit
Step 8
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
180
Implementing BGP
Disabling Selective VRF Download

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English