Cisco ASR 9000 Series Manual

The mounting brackets on the Cisco ASR 9006 Router chassis have a pair of holes at the top and bottom
of each bracket; the remaining openings in the brackets are slots. When mounting the router in a 2-post
rack, you must first use the holes to locate and position the brackets on the rack. Insert the screws through
the bracket holes into the rack before inserting screws through the bracket slots.
Note
Figure 15: Cisco ASR 9010 Router Mounted in a 2-Post Rack
Figure 16: Cisco ASR 9006 Router Mounted in a 2-Post Rack
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
21
Preparing for Installation
Site Requirement Guidelines

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model