Cisco ASR 9000 Series - Page 29

Profile 2:MS-PMSI-mLDP-MP2MP (No BGP-AD)
These are the characteristics of this profile:
•
MP2MP mLDP trees are used in the core.
•
Different MS-PMSI core-trees for IPv4 and IPv6 traffic.
•
The multicast traffic can be SM or SSM.
•
Extranet, Hub and Spoke are supported.
•
Inter-AS Options A, B, and C are supported. Connector Attribute is announced in VPN-IP routes.
Profile 3:Rosen-GRE with BGP-AD
These are the characteristics of this profile:
•
PIM-trees are used in the core. The data encapsulation method used is GRE.
•
SM or SSM used in the core.
•
Configuration is based on Default-MDTs.
•
The multicast traffic can be SM or SSM.
•
MoFRR in the core is supported.
•
Extranet, Hub and Spoke, CsC, Customer-RP-discovery (Embedded-RP, AutoRP and BSR) are supported.
•
Inter-AS Options A, B, and C are supported. VRF-Route-Import EC is announced in VPN-IP routes.
Profile 4: MS-PMSI-mLDP-MP2MP with BGP-AD
These are the characteristics of this profile:
•
MP2MP mLDP trees are used in the core.
•
The multicast traffic can be SM or SSM.
•
Extranet, Hub and Spoke, CsC, Customer-RP-discovery (Embedded-RP, AutoRP, and BSR) are supported.
•
Inter-AS Options A, B, and C are supported. VRF-Route-Import EC is announced in VPN-IP routes.
Profile 5: MS-PMSI-mLDP-P2MP with BGP-AD
These are the characteristics of this profile:
•
P2MP mLDP trees are used in the core.
•
The multicast traffic can be SM or SSM.
•
Extranet, Hub and Spoke, CsC, Customer-RP-discovery (Embedded-RP, AutoRP and BSR) are supported.
•
Inter-AS Options A, B, and C are supported. . VRF-Route-Import EC is announced in VPN-IP routes.
Profile 6: VRF In-band Signaling (No BGP-AD)
These are the characteristics of this profile:
•
P2MP mLDP trees are used in the core.
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
29
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support