Cisco ASR 9000 Series - Page 60

PurposeCommand or Action
239.1.1.1 0.255.255.255
commit
Step 11
(Optional) Clears BSR entries from the PIM RP group
mapping cache.
clear pim [vrf vrf-name] [ipv4 | ipv6] bsr
Example:
RP/0/RSP0/CPU0:router# clear pim bsr
Step 12
(Optional) Displays PIM candidate RP information for
the BSR.
show pim [vrf vrf-name] [ipv4 | ipv6] bsr candidate-rp
Example:
RP/0/RSP0/CPU0:router# show pim bsr candidate-rp
Step 13
(Optional) Displays PIM candidate election information
for the BSR.
show pim [vrf vrf-name] [ipv4 | ipv6] bsr election
Example:
RP/0/RSP0/CPU0:router# show pim bsr election
Step 14
(Optional) Displays PIM RP cache information for the
BSR.
show pim [vrf vrf-name][ipv4 | ipv6] bsr rp-cache
Example:
RP/0/RSP0/CPU0:router# show pim bsr rp-cache
Step 15
(Optional) Displays group-to-PIM mode mapping.
show pim [vrf vrf-name][ipv4 | ipv6] group-map
[ip-address-name] [info-source]
Step 16
Example:
RP/0/RSP0/CPU0:router# show pim ipv4 group-map
Calculating Rates per Route
This procedure enables multicast hardware forward-rate counters on a per-VRF-family basis.
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
60
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
Calculating Rates per Route