Name: Cisco ASR 9006
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Figure 1: Cisco ASR 9010 Router Packaged on a Shipping Pallet

A fully equipped router with six power modules can weigh as much as 375 lbs (170.5 kg); an empty chassis

weighs 150 lbs (67.8 kg). The chassis is designed to be lifted by two persons after you remove some of the

components, such as line cards, power supplies, and the fan tray, to reduce the weight before lifting the chassis.

See Removing Components Before Installing the Chassis, on page 20 for procedures to remove these

components.

Required Tools and Equipment

Before you begin the rack-mount installation, you must read and understand the information in the

Rack-Mounting and Air Flow Clearance Guidelines, page 1-24 , and have the following tools and equipment:

• ESD-preventive wrist strap

• Number 1 and number 2 Phillips screwdrivers

• 1/4-inch (6.35-mm) and 3/16-inch (4.5-mm) flat-blade screwdrivers

• Tape measure

• Level (optional)

Unpacking and Installing the Chassis

Required Tools and Equipment

Other manuals for Cisco ASR 9006

Questions and Answers:

Need help?

Do you have a question about the Cisco ASR 9006 and is the answer not in the manual?

General