Cisco ASR 9006 Unpacking And Installing

Figure 75: Installing Chassis Side Brackets on the Cisco ASR 9010 Router
Right chassis
side bracket
3Six screws for
attaching the
chassis side
brackets (three
per side)
2Left chassis side
bracket
1
Step 5 Attach the left plastic corner piece to the mounting bracket at the front upper left corner of the chassis (see
the figure below).
Step 6 Attach the right plastic corner piece to the mounting bracket at the front upper right corner of the chassis.
Figure 76: Installing Plastic Chassis Corners on the Cisco ASR 9006 Router (Base Accessories Installation)
Unpacking and Installing the Chassis
77
Unpacking and Installing the Chassis
Installing Base Chassis Accessories on the Cisco ASR 9006 Router

Cisco ASR 9006 Specifications

General

Chassis Type	Modular
Rack Units	10 RU
Slots	6
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
Power Supply	AC or DC
Cooling	Front-to-back airflow
Input Voltage	100-240 VAC or -48 to -60 VDC
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	10GE, 40GE, 100GE
Management Interfaces	Ethernet, Console, Auxiliary