20
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-08
Caveats in Cisco IOS XE 3.9S Releases
• CSCue81082
Symptom: FMAN OBJ download failure seen for (*,G/m) entries on ACL change.
Conditions: This issue occurs when ACL is configured on the RP and the ACL is deleted or added.
Workaround: There is no workaround.
• CSCue83621
Symptom: Policy-map stops working on removing class default class dynamically.
Conditions: This issue occurs when policy-map is attached to target and class-default of top level
is deleted dynamically.
Workaround: Detach and reattach the policy-map on target.
• CSCue88974
Symptom: Standby RSP appears as UNKNOWN in show inventory command and alarm is raised.
The show facility-alarm command status reports the alarm.
Conditions: This issue occurs after OIR is performed on the standby RSP.
Workaround: There is no workaround.
• CSCue89503
Symptom: Power supply status become “CRITICAL” after removing or inserting of the power
supply.
Conditions: This issue is seen after multiple OIRs.
Workaround: There is no workaround.
• CSCue90867
Symptom: Machine check errors and kernel crash was seen on SSO.
Conditions: This issue occurs after performing SSO.
Workaround: There is no workaround.
• CSCue91533
Symptom: Traffic through VPLS pseudowire is flooded due to MAC aging.
Conditions: This symptom is observed when bridge descriptor index (internal index) assigned to
MAC address exceeds 20480.
Workaround: There is no workaround.
• CSCue93989
Symptom: Less traffic received then expected rate for IMA link.
Conditions: This issue occurs when IMA group is configured with 16 OC-3 T1 links. 888 pvcs are
created and traffic is sent to only one pvc.
Workaround: There is no workaround.
• CSCue94811
Symptom: Process crash on standby does not generate a core file.
Conditions: This issue occurs on normal conditions.
Workaround: There is no workaround.
• CSCuf02518
Symptom: IPv4 Traffic gets affected on IPv6 ACL applied interface.
To Next Page
Loading...
Need help?
General
