EasyManuals Logo

Cisco ASR 903 Release Notes

Cisco ASR 903
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
3
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-08
Chapter
New Software Features in Cisco IOS XE Release 3.10.1S
EC 61000-6-5:2001—IEC standard defining immunity for power station and substation
environments
For information on how to install the serial interface module, see the Cisco ASR 903 Hardware
Installation Guide.
For information on how to configure the serial interface module, see Configuring Raw Socket Transport
on the Cisco ASR 903 Router.
Note We recommend the installation of the Metro IP Services and Metro Aggregation Services licenses with
serial interface module. For more information about obtaining and installing licenses, see Software
Licensing Overview.
CWDM SFP
Cisco IOS XE Release 3.10S introduces support for the following SFPs on the 10 Gigabit Ethernet XFP
Interface Module:
ONS-XC-10G-EP
ONS-XC-10G-1470
ONS-XC-10G-1490
ONS-XC-10G-1510
ONS-XC-10G-1530
ONS-XC-10G-1550
ONS-XC-10G-1570
ONS-XC-10G-1590
ONS-XC-10G-1610
For more information about how to configure these SFPs, see:
http://www.cisco.com/en/US/partner/docs/interfaces_modules/transceiver_modules/installation/note/O
L_24246.html
http://www.cisco.com/en/US/partner/products/hw/modules/ps5455/tsd_products_support_series_home
.html
New Software Features in Cisco IOS XE Release 3.10.1S
There are no new software features introduced for Cisco IOS XE Release 3.10.1.S.
New Software Features in Cisco IOS XE Release 3.10S
The following features are introduced in Cisco IOS Release 3.10S.
Access Circuit Redundancy, page 6-4
Access Switch Device Manager Template, page 6-4

Table of Contents

Other manuals for Cisco ASR 903

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 903 and is the answer not in the manual?

Cisco ASR 903 Specifications

General IconGeneral
Form FactorModular
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Humidity5% to 95% non-condensing
RedundancyYes, redundant power supplies and route processors
Operating SystemCisco IOS XE
Power SupplyAC or DC
Switching Capacity240 Gbps
Operating Temperature-40°C to 65°C (-40°F to 149°F)
MTBF200, 000 hours
Supported ProtocolsIPv4, IPv6, MPLS, L2VPN, L3VPN
InterfacesGigabit Ethernet, 10 Gigabit Ethernet, T1/E1

Related product manuals