Cisco ASR-920-12SZ-A User Manual

Ground the Device 42
Connect Power Cables 43
Attach AC Power Cables 43
Service AC Power Supply 44
Attach DC Power Cables 45
Activate DC Power Supply 46
Service the DC Power Supply 47
Connect Gigabit Ethernet Ports 47
Connect SFP Modules 48
Install SFP Modules 48
Remove SFP Modules 49
Connect Fiber Optic SFP Modules 49
Connect RJ-45 Connector 50
Connect Chassis to Network 50
Connecting Console Cables 50
Connecting to the USB Serial Port Using Microsoft Windows 50
Connecting to the Console Port Using Mac OS X 51
Connecting to the Console Port Using Linux 52
Installing the Cisco USB Device Driver 52
Uninstalling the Cisco USB Device Driver 53
Connecting a USB Flash Device 53
Removing a USB Flash Device 53
Install GNSS Module 54
Connecting Timing Cables 55
Connecting a Cable to the BITS Interface 56
Connecting Cables to the GPS Interface 56
Connect to EIA Console Port 57
Connect a Management Ethernet Cable 57
Configure the Device 59
CHAPTER 5
Power up the Device 59
Verify the Front Panel LEDs 59
Verify the Hardware Configuration 60
Check Hardware and Software Compatibility 60
Cisco ASR-920-12SZ-A and Cisco ASR-920-12SZ-D Aggregation Services Router Hardware Installation Guide
v
Contents

Cisco ASR-920-12SZ-A Specifications

General

Brand	Cisco
Model	ASR-920-12SZ-A
Category	Network Router
Language	English