Cisco ASR 920 series Installing Guide

SUMMARY STEPS
1.
Position the cable guide-left and cable guide-right against the front of the chassis and align the four screw
holes, as shown in the fgure below.
2.
Secure the cable guides with the four M6x12mm screws supplied with the cable kit. The recommended
maximum torque is 3N-m.
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
9
Installing the Cisco ASR 920 Series Router
Attaching the Cable Guides

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English