To Next Page

To Previous Page

2. Point the remote at the device.

3. Press and while holding a selected mode key (TV or DVD), press the OKkey.Forexample,to

search for a TV code, press and hold TV and OK at the same time.

4. Release both keys and all the mode keys will blink twice.

5. Enter the programming code 922 by pressing the numeric keys on the remote. The mode key

you selected in step 3 blinks twice to indicate a successful entry.

6. Point the remote toward the device, and press PLAY.

7. Your device powers o when it nds the correct code. Then, choose one of the following

options:

  • Save code and exit – Press the ENTER key on the remote to program the code in the

   remoteandthemodekeyashesthreetimesindicatingsuccessfulentry.

  • Step forward – Press the fast-forward (FF) key on the remote to step ahead through the

codes one at a time. Then, return to step 6.

  • Step backward – Press the rewind (REW) key on the remote to step back through the

codes one at a time. Then, return to step 6.

  • Exit without saving the code – Press the EXIT key on the remote. The selected mode key

   ashesthreetimesandreturnstonormaloperation.

  • Send the current code – Press the POWER key on the remote to send the current code. If

the device turns back on, press the ENTER key. If the device does not turn on, return to

step 6.

  • Continue with auto-search function – Press the PLAY key on the remote to continue with

the auto-search function. Then, return to step 6.

AUTO-SEARCHING THE CODE LIBRARY FOR AUX MODE CODES (Program Code 922)

1. Turn on the device that you want to assign to the AUX key.

2. Point the remote at the device.

3. Press and while holding the AUX key press the OK key.

4. Release both the AUX and the OK keys and all the mode keys will blink twice.

5. Enter the programming code 922 by pressing the numeric keys on the remote. The AUX key

blinks twice to indicate a successful entry.

6. Press the PLAY key, choose one of the following device categories and then, using the

number keys on the remote, press its assigned number (1-4) based on the following list:

UNIVERSAL REMOTE CONTROL

Cisco AT6400 User Manual

Other manuals for Cisco AT6400