clock update-calendar command, 49
collapsed core design, 17
collecting RMON statistics, 204-205
command set (ROM Monitor), 9-11
commands
cd, 37
channel group, 75
clock update-calendar, 49
copy, 39-40
enable secret, 30
format, 39
ip address, 85
ip domain-lookup, 28
more, 4
ping, verifying packet reachability,
215-216
recalling, 4
redundancy force-switchover, 44
regular expressions, 5
reload, 44
router, 85
service config, 28
service password-encryption, 30
session, 34
set spantree channelvlancost, 64
show cdp, 46
show channel group, 63
show etherchannel, 77
show interfaces, 61, 77
show interfaces trunk, 97
show ip route default, 28
show module all, 45
show redundancy states, 132
show running-config, 3
show sessions, 6
show spantree, 251
switchport, 72
switchport host, 252
switchport mode trunk, 99
switchport trunk encapsulation, 96
traceroute, 216-218
undelete, 38
vlan allocation policy, 89
community string values, configuring
SNMP access, 200-201
community VLANs, creating, 105
configuration files (SNMP), saving to
TFTP server, 203
configuration mode, 2
configuring
ACLs, 183-184
broadcast suppression, 168-169
CDP, 46-47
Cisco IOS Software, Web browser
interface, 8-9
DARP, 191
default gateway, 28
DNS services, 28-29
firewall load balancing, 159-163
HSRP, 136-137
HTTP services, 29
IGMP snooping, 143-144
IP management address, 27-28
Layer 2 interfaces
Layer 2 interfaces
EtherChannel, 62-67
Ethernet, 57-60
port selection, 56-57
switching table information,
displaying, 53-55
Layer 3 EtherChannels, 74-75
example configuration, 77-78
verifying configuration, 76-77
Layer 3 Ethernet interfaces, 72-73
configuring 319
To Next Page
Loading...
Need help?
General