To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst 2960X-48FPD-L and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Manageable | Yes |
| Ports | 48 |
| Uplink Ports | 4 x 1G SFP |
| PoE Support | Yes |
| PoE Budget | 740W |
| RAM | 512 MB |
| Flash Memory | 256 MB |
| VLANs | Up to 4096 |
| Model | Catalyst 2960X-48FPD-L |
| Product Series | Catalyst 2960-X |
| MAC Address Table Size | 16, 000 entries |
| Software | Cisco IOS |
| Stackable | Yes |
| Power Supply | Internal |
| Operating Temperature | 0 to 45°C |
| Operating Humidity | 10% to 90% (non-condensing) |
Explains document formatting, symbols, and conventions used throughout the manual.
Lists other Cisco documents relevant to the product for further information and context.
Provides instructions on how to get more Cisco documentation and submit support requests.
Details the different Catalyst 2960-X and 2960-XR switch models and their specifications.
Describes the components and layout of the switch's front panel, including ports and LEDs.
Details the components and layout of the switch's rear panel, including slots and connectors.
Outlines the various methods available for managing the switch, such as CLI and GUI tools.
Provides information on network configuration concepts and examples for the switches.
Critical safety precautions and warnings to follow before and during the installation process.
Lists the items included in the product box for installation and setup.
Specifies the necessary tools and equipment required for installing the switch.
Provides essential guidelines and best practices for installing the switch in various environments.
Instructions on how to verify the switch's proper operation after installation and before full deployment.
Guidance on planning and performing the installation of a switch stack for increased capacity.
Step-by-step procedures for physically installing the switch, including rack-mounting.
Instructions on how to connect FlexStack cables for stacking compatible switches.
Details on how to install an optional retainer to secure the power cord.
Procedures for installing Small Form-factor Pluggable (SFP) and SFP+ modules into the switch.
Guidance on connecting cables to SFP and SFP+ modules for network connectivity.
How to connect devices using 10/100/1000 ports with Power over Ethernet Plus (PoE+).
Instructions for connecting devices to the switch's 10/100/1000 Ethernet ports.
Recommendations for next steps after initial installation and basic configuration.
Information about the different power supply modules available for the Catalyst 2960-XR switches.
Guidelines and precautions for installing or replacing the switch's power supply modules.
Step-by-step instructions for installing or replacing an AC power supply unit.
How to locate the serial number for the switch and its power supplies.
General guidance on identifying and troubleshooting issues using LEDs and other indicators.
Troubleshooting common issues related to network cables, ports, and link status.
Specific troubleshooting steps for issues with 10/100/1000 port connectivity.
Troubleshooting steps for problems related to PoE+ power delivery on 10/100/1000 ports.
Troubleshooting tips for SFP and SFP+ modules and their connections.
Guidance on diagnosing and resolving issues affecting overall switch performance.
Procedure to reset the switch to factory default settings by clearing IP and configuration.
Instructions on how to locate the serial number for troubleshooting purposes.
Steps for replacing a malfunctioning switch within a stack with a new unit.
Details environmental operating ranges, humidity, and altitude limits for the switches.
Comprehensive technical specifications for various Catalyst 2960-X switch models.
Comprehensive technical specifications for various Catalyst 2960-XR switch models.
Details the specifications and pinouts for various connectors used on the switches.
Information about supported cables and adapters for network connectivity.
How to access the Command Line Interface (CLI) using the Express Setup utility.
Steps to access the CLI via the console port using a terminal emulation program.
Guide to providing initial network and system configuration details during setup.
