Cisco Catalyst 2960X-48FPD-L - Specifications for the Catalyst 2960-XR Switches

Specifications for the Catalyst 2960-XR Switches
Table 21: Physical Specifications for the Catalyst 2960-XR Switches
Physical Dimensions
•
11.3 lb (5.1 kg) Catalyst 2960XR-48FPD-I
• 11.3 lb (5.1 kg) Catalyst 2960XR-48LPD-I
•
11.1 lb (5.0 kg) Catalyst 2960XR-48TD-I
•
10.9 lb (5.0kg) Catalyst 2960XR-24PD-I
•
10.7 (4.9 kg) Catalyst 2960XR-24TD-I
•
11.4 (5.2 kg) Catalyst 2960XR-48FPS-I
• 11.4 lb (5.2 kg) Catalyst 2960XR-48LPS-I
•
11.0 lb (5.0 kg) Catalyst 2960XR-48TS-I
• 10.9 lb (5.0 kg) Catalyst 2960XR-24PS-I
• 10.8 lb (4.9 kg) Catalyst 2960XR-24TS-I
Weights do not include power supplies.
Weight
1.75 x 16.05 x 17.5 in. (4.45 x 40.77 x 44.5 cm)Dimensions (H x D x W)
Table 22: Power Specifications for the AC Power Catalyst 2960-XR Switches
Power Requirements
•
PWR-C2-250WAC: 250 W
•
PWR-C2-640WAC: 640 W
•
PWR-C2-1025WAC: 1025 W
Maximum output power
•
PWR-C2-250WAC: 250 W, 100-240 VAC, (autoranging) 50-60 Hz
•
PWR-C2-640WAC: 640 W, 100-240 VAC, (autoranging) 50-60 Hz
•
PWR-C2-1025WAC: 1025 W, 115-240 VAC, (autoranging) 50-60
Hz
Input voltage and Frequency
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
74 OL-28309-02
Technical Specifications
Specifications for the Catalyst 2960-XR Switches