Cisco Catalyst 2000 - Displaying Information about SLB

Chapter 10: Server Load Balancing (SLB) 157
Section 10-1
(real-server) faildetect numconns 4
(real-server) retry 30
(real-server) inservice
(real-server) exit
(server-farm) real 192.168.250.11
(real-server) weight 16
(real-server) faildetect numconns 4
(real-server) retry 30
(real-server) inservice
(real-server) exit
(server-farm) real 192.168.250.12
(real-server) weight 8
(real-server) faildetect numconns 4
(real-server) retry 30
(real-server) inservice
(real-server) exit
(global) ip slb vserver VSERVER1
(virtual-server) serverfarm FARM1
(virtual-server) virtual 10.10.10.101 tcp www
(virtual-server) sticky 60 group 1
(virtual-server) advertise active
(virtual-server) inservice
(virtual-server) exit
(global) ip slb dfp password 0 test123
(slb-dfp) agent 192.168.250.10 2000
(slb-dfp) agent 192.168.250.11 2000
(slb-dfp) agent 192.168.250.12 2000
(slb-dfp) exit
(global) probe HTTP1 http
(probe) interval 120
(probe) port 80
(probe) request method get
(probe) exit
Displaying Information About SLB
Table 10-1 lists some switch commands that you can use to display helpful information
about SLB configuration and status.