To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst 2900 Series XL and is the answer not in the manual?
General| Switching Capacity | 3.2 Gbps |
|---|---|
| Power Supply | Internal power supply |
| Memory | 8 MB Flash |
| Management | CLI, Web-based, SNMP |
| Operating Humidity | 10% to 85% non-condensing |
| Layer | Layer 2 |
Lists the main network switch hardware included in the package.
Documents for installation and release notes for the switch series.
Specifies the console cable used for connecting to the switch's console port.
Details the power cable required to supply electricity to the switch.
Adapter for connecting serial devices to the switch's console port.
Terminal connector for serial communication with the switch.
Components for physically mounting the switch in a server rack.
Feet for placing the switch on a flat surface.
Note on required Ethernet cables for device connectivity.
Instructions for connecting end devices like PCs and routers to the switch.
Instructions for connecting other network devices like switches and hubs.
Procedure for connecting the switch to a power source.
Steps to establish a console connection for initial configuration.
Lists essential network information needed for switch configuration.
Procedure to assign IP address, subnet mask, and default gateway.
Confirms the entered IP configuration details are correct.
Options for further configuration and management after initial setup.
Details operating systems and browsers compatible with CVSM.
Steps to configure Netscape browser for accessing the switch.
Steps to configure Internet Explorer browser for accessing the switch.
Instructions to access the Visual Switch Manager interface via browser.
