Cisco Catalyst 2960-CX Manual

Te1/0/1 1 Stack Port N/W Port Fiber
Te1/0/2 2 Stack Port Stack Port Fiber
The following output example shows the status of the port after reload from stack port to network port.
Switch#show switch hstack-ports
Horizontal stack port status :
Te Ports Stack Port Operational Status Next Reload Status Media Type
--------- ------------ -------------------- ------------------- --------------
Te1/0/1 1 N/W Port N/W Port Fiber
Te1/0/2 2 Stack Port Stack Port Fiber
The following output example shows the status of the horizontal stack port.
Switch# show switch hstack-ports
Horizontal stack port status :
Te Ports Stack Port Operational Status Next Reload Status Media Type
--------- ------------ -------------------- ------------------- -------------
Te1/0/1 1 Stack Port Stack Port Fiber
Te1/0/2 2 Stack Port Stack Port Fiber
Te2/0/1 1 Stack Port Stack Port Fiber
Te2/0/2 2 Stack Port Stack Port Fiber
Te3/0/1 1 Stack Port Stack Port Copper
Te3/0/2 NA N/W Port N/W Port Copper
Te3/0/3 2 Stack Port Stack Port Fiber
Te3/0/4 NA N/W Port N/W Port Fiber
Te4/0/1 NA N/W Port N/W Port Copper
Te4/0/2 1 Stack Port Stack Port Copper
Te4/0/3 2 Stack Port Stack Port Fiber
Te4/0/4 NA N/W Port N/W Port Fiber
Te5/0/1 1 Stack Port Stack Port Fiber
Te5/0/2 2 Stack Port Stack Port Fiber
Te6/0/1 1 Stack Port Stack Port Fiber
Te6/0/2 2 Stack Port Stack Port Fiber
Te7/0/1 1 Stack Port Stack Port Copper
Te7/0/2 NA N/W Port N/W Port Copper
Te7/0/3 2 Stack Port Stack Port Fiber
Te7/0/4 NA N/W Port N/W Port Fiber
Te8/0/1 NA N/W Port N/W Port Copper
Te8/0/2 1 Stack Port Stack Port Copper
Te8/0/3 2 Stack Port N/W Port Fiber
Te8/0/4 NA N/W Port N/W Port Fiber
Additional References for Switch Stacks
Related Documents
Document
Title
Related Topic
Cabling and powering on a switch stack.
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgiTo help you research and resolve system
error messages in this release, use the Error
Message Decoder tool.
Managing Switch Stacks
23
Managing Switch Stacks
Additional References for Switch Stacks

Cisco Catalyst 2960-CX Specifications

General

PoE	No
DRAM	512 MB
MAC Address Table Size	16, 000 entries
Stacking	No
Model	Cisco Catalyst 2960-CX
Ports	8 x 10/100/1000 Ethernet ports
Uplink Interfaces	2 x 1G SFP
Power Input	100 to 240 VAC
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-25°C to 70°C (-13°F to 158°F)
Power Consumption	15W
Relative Humidity	10 to 95% noncondensing