Catalyst 2960-S Switch Getting Started Guide
12
Catalyst 2960-S Switch Getting Started Guide
OL-19793-02
You must be a registered Cisco.com user, but you need no other access
privileges.
2. Find the Network Assistant installer.
3. Download the Network Assistant installer and run it. (You can run it directly
from the Web if your browser offers this choice.)
4. When you run the installer, follow the displayed instructions. In the final
panel, click Finish to complete the Network Assistant installation.
See the Network Assistant online help and the getting started guide for more
information.
Command-Line Interface
You can enter Cisco IOS commands and parameters through the CLI. Access the
CLI by using one of these options:
• Switch Console Port
• Switch Ethernet Management Port
• Switch USB Port
To Next Page
Loading...
