To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst 2960X-48FPS-L and is the answer not in the manual?
General| Device Type | Switch |
|---|---|
| Enclosure Type | Rack-mountable |
| Subtype | Gigabit Ethernet |
| Power Over Ethernet (PoE) | Yes |
| PoE Budget | 740 W |
| Jumbo Frame Support | Yes |
| RAM | 512 MB |
| Flash Memory | 128 MB |
| Power Device | Internal power supply |
| Width | 17.5 in |
| Model | Catalyst 2960X-48FPS-L |
| Ports | 48 x 10/100/1000 PoE+ |
| MAC Address Table Size | 16000 entries |
| Routing Protocol | Static routing |
| Remote Management Protocol | SNMP 1, 2, 3, Telnet, SSH, CLI |
| Features | Layer 2 switching, VLAN support, QoS |
| Compliant Standards | IEEE 802.1Q, IEEE 802.1P, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Status Indicators | Port status, PoE |
| Voltage Required | 100 to 240 VAC |
| Operating Temperature | 0 to 45 °C |
| Operating Humidity | 10 - 95% (non-condensing) |
| Memory | 512 MB RAM |
