Cisco Catalyst 3110G

16
Step 3 Select Configure > Express Setup from the menu. The Express Setup Basic Settings screen
appears (Figure 9).
Figure 9 Express Setup Basic Settings Screen
Step 4 Enter this information in the Network Settings fields.
– In the Switch Password field, enter your password. The password can be from 1 to 25
alphanumeric characters, can start with a number, is case sensitive, allows embedded spaces,
but does not allow spaces at the beginning or end.
– In the Confirm Switch Password field, enter your password again.
You can enter the Optional Settings information now or enter it later by using the switch module
device manager interface.
Step 5 In the Host Name field, enter a name for the switch module. The host name is limited to
31 characters; embedded spaces are not allowed.
Step 6 In the System Date and System Time fields, enter the current date and time, or use the down
arrows to select them.
Step 7 In the Time Zone field, use the down arrow to choose your time zone.
Step 8 Click Enable in the Daylight Savings Time field to enable this feature.