25
Side-By-Side Stacking
In this example, eight switches are stacked side-by-side with redundant connections by using 0.5- and
3-meter StackWise cables.
In this example, nine switches are stacked side-by-side with redundant connections by using 0.5- and
3-meter StackWise cables.
7 Rack-Mounting
This section covers basic 19-inch rack-mounting and switch port connections. For additional cabling
information, see the Catalyst 3750 Switch Hardware Installation Guide on Cisco.com.
Equipment That You Supply
You need to supply a number-2 Phillips screwdriver to rack-mount the switch.
86825
90532
To Next Page
Loading...
