EasyManuals Logo

Cisco Catalyst 3750G User Manual

Cisco Catalyst 3750G
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
31
Connect the StackWise Cables
Follow these steps to connect the StackWise cable to the StackWise ports:
Caution Removing and inserting the StackWise cable can shorten its useful life. Do not remove and
insert the cable more often than is absolutely necessary.
Note Always use a Cisco-approved StackWise cable to connect the switches.
Step 1
Remove the dust covers from the StackWise cables and StackWise ports, and store
them for future use.
Step 2
Insert one end of the
StackWise cable into the
StackWise port on the back
of the switch.
Step 3
Use the window in the StackWise cable to align the connector correctly. Secure the
screws tightly.
Step 4
Insert the other end of the cable into the connector of the other switch, and secure
the screws tightly.
CONSOLE
STACK 1
STACK 2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 3750G and is the answer not in the manual?

Cisco Catalyst 3750G Specifications

General IconGeneral
ModelCisco Catalyst 3750G
Switching Capacity32 Gbps
Forwarding Rate38.7 Mpps
Stacking Bandwidth32 Gbps
DRAM128 MB
Flash Memory16 MB
MAC Address Table Size12, 000 entries
VLANs1005
Operating Humidity10% to 85% non-condensing
Ports48 10/100/1000 Ethernet ports
Uplink Interfaces4 SFP Gigabit Ethernet ports
Jumbo FramesUp to 9216 bytes
Power SupplyAC
Operating Temperature0 to 45°C

Related product manuals