EasyManuals Logo

Cisco Catalyst C9500-40X User Manual

Cisco Catalyst C9500-40X
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Figure 18: A PCB with Corrosion on its Metal Contacts
EMI and Radio Frequency Interference
Electro-Magnetic interference (EMI) and radio frequency interference (RFI) from a system can adversely
affect devices such as radio and television (TV) receivers operating near the system. Radio frequencies
emanating from a system can also interfere with cordless and low-power telephones. Conversely, RFI from
high-power telephones can cause spurious characters to appear on the system monitor. RFI is defined as any
EMI with a frequency above 10 kilohertz (kHz). This type of interference can travel from the system to other
devices through the power cable and power source, or through the air in the form of transmitted radio waves.
The Federal Communications Commission (FCC) publishes specific regulations to limit the amount of harmful
interference emitted by computing equipment. Each system meets these FCC regulations. To reduce the
possibility of EMI and RFI, follow these guidelines:
Always operate the system with the chassis covers installed.
Ensure that all chassis slots are covered by a metal filler bracket and that an unused power supply bay
has a metal cover plate installed.
Ensure that the screws on all peripheral cable connectors are securely fastened to their corresponding
connectors on the back of the chassis.
Always use shielded cables with metal connector shells for attaching peripherals to the system.
Cisco Catalyst 9500 Series Switches Hardware Installation Guide
29
Preparing for Installation
EMI and Radio Frequency Interference

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst C9500-40X and is the answer not in the manual?

Cisco Catalyst C9500-40X Specifications

General IconGeneral
ModelC9500-40X
CategorySwitch
Product SeriesCatalyst 9500
Rack Units1 RU
StackingStackWise Virtual
SoftwareCisco IOS XE
DRAM16 GB
Flash Memory16 GB
Input Voltage100 to 240 VAC
Power Consumption400W
Ports40 x 10GE
Uplink Ports4 x 40G/100G QSFP28
Forwarding Rate1, 440 Mpps
Dimensions1.73 x 17.5 x 21.52 in. (4.4 x 44.5 x 54.7 cm)

Related product manuals