Cisco Catalyst WS-C3850-24T-L - User Manual

Product Overview
The Catalyst 3850 family of switches are Ethernet switches to which you can connect devices such as Cisco
IP Phones, Cisco Wireless Access Points, workstations, and other network devices such as servers, routers,
and other switches.
The Catalyst 3850 switches support stacking through Cisco StackWise-480 technology and power management
through StackPower. The StackWise technology for the Catalyst 3850 switches is called StackWise-480.
Unless otherwise noted, the term switch refers to a standalone switch and to a switch stack.
This chapter contains these topics:
•
Switch Models, page 1
•
Front Panel, page 5
•
Rear Panel, page 23
•
Management Options, page 32
Switch Models
Table 1: Catalyst 3850 Switch Models and Descriptions
Description
Supported
Software
Image
Switch Model
Stackable 24 10/100/1000 Ethernet ports, 1 network module
slot
1
, 350 W power supply
LAN BaseWS-C3850-24T-L
Stackable 48 10/100/1000 Ethernet ports, 1 network module
slot, 350 W power supply
LAN BaseWS-C3850-48T-L
Stackable 24 10/100/1000 PoE+
2
ports, 1 network module
slot, 715 W power supply
LAN BaseWS-C3850-24P-L
Stackable 48 10/100/1000 PoE+ ports, 1 network module
slot, 715 W power supply
LAN BaseWS-C3850-48P-L
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-05 1

Cisco Catalyst WS-C3850-24T-L Specifications

General

Model	WS-C3850-24T-L
Product Series	Catalyst 3850
Device Type	Switch
Enclosure Type	Rack-mountable
Power over Ethernet (PoE)	No
Stackable	Yes
MAC Address Table Size	32000 entries
RAM	4 GB
Flash Memory	4 GB
Power Supply	Internal power supply
Voltage Required	100-240 V AC
Subtype	LAN switch
Ports	24 x 10/100/1000
Stacking	480 Gbps
Jumbo Frame Support	9198 bytes
Routing Protocol	OSPF, RIP, EIGRP
Remote Management Protocol	SNMP 1, Telnet, SSH, CLI
Features	Quality of Service (QoS)
Compliant Standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.3
Operating Humidity	10 - 90% (non-condensing)