Cisco Catalyst WS-C3850-24T-L

Description
Supported
Software
Image
Switch Model
Catalyst 3850 switch with SFP+ transceivers, 48 ports that
support up to 10 G, and 4 QSFP ports that support up to 40
G. 750 W power supply.
The airflow direction for this switch is from the rear panel to
the front panel.
IP ServicesWS-C3850-48XS-F-E
Stackable 12 100M/1G/2.5G/5G/10G and 36 1 G UPoE ports,
1 network module slot, 1100 W power supply
IP ServicesWS-C3850-12X48U-E
Stackable 24 100M/1G/2.5G/5G/10G UPoE ports, 1 network
module slot, 1100-W power supply
IP ServicesWS-C3850-24XU-E
1
For supported network modules, see Network Modules, on page 10 .
2
PoE+ = Power over Ethernet plus (provides up to 30 W per port).
3
UPOE = Universal Power Over Ethernet (provides up to 60 W Cisco UPOE per port)
4
The WS-C3850-48XS switches do not support StackWise-480
Front Panel
This section describes the front panel components:
•
24 or 48 downlink ports of one of these types:
◦
10/100/1000
◦
10/100/1000 PoE+
◦
10/100/1000 Cisco UPoE
◦
10 G SFP+
•
12 or 24 SFP or SFP+ module downlink slots
•
Uplink network modules slot
•
USB Type A connector
•
USB mini-Type B (console) port
•
LEDs
•
Mode button
All of the switches have similar components. See the following illustrations for examples.
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-05 5
Product Overview
Front Panel