Cisco D9800 Getting Started

D9800 Web GUI Environment
The following is an example of the D9800 web GUI page:
Figure 3: D9800 Web GUI
The following table displays the general buttons on the D9800 web GUI.
DescriptionButton
Saves and applies the settings to the receiver.Apply
Reads existing data from the unit. If edits were made in a setup page, then
unsaved changes are discarded.
Refresh
Discards any changes made and sets data to default values.Reset Defaults
Resets counters on the displayed page.Clear Counters
Cisco D9800 Network Transport Receiver Version 3.11 Installation and Configuration Guide
8
Getting Started
D9800 Web GUI Environment

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English