Cisco DTA 170HD User Manual

3Thank you for choosing Charter Communications
2. Connect the DTA to the TV
a. If you have an HDTV, connect the HDMI cable to the HDMI port on the back of the DTA and then to the HDMI input
on the back of your TV.
b. For TVs without an HDMI port, connect the DTA to the TV using the coax cable. Ensure that the slide switch is
on channel 3 or 4, depending on your local standards, and ensure that your TV is tuned to the corresponding
channel selected.
Power
HDMI
To TVCable in IR IN Slide Switch
Power
HDMI
To TVCable in IR IN Slide Switch
Digital Adapter
HDMI
HDTV
Supplied
RF cable
To the wall
AC outlet
Supplied
HDMI cable
SDTV
Supplied
RF cable
To the wall
AC outlet
RF cable
Set this switch
to Channel 3
From your
cable service
From your
cable service
IR Extender
IR Extender
Digital Adapter
SD or Analog TV
Power
HDMI
To TVCable in IR IN Slide Switch
Power
HDMI
To TVCable in IR IN Slide Switch
Digital Adapter
HDMI
HDTV
Supplied
RF cable
To the wall
AC outlet
Supplied
HDMI cable
SDTV
Supplied
RF cable
To the wall
AC outlet
RF cable
Set this switch
to Channel 3
From your
cable service
From your
cable service
IR Extender
IR Extender
Digital Adapter
HDTV

Cisco DTA 170HD Specifications

General

Brand	Cisco
Model	DTA 170HD
Category	Adapter
Language	English