Cisco DTA 170HD User Manual

Customer Care 1-800-314-7195
charter.com
This guide is intended for owners or managers and front desk personnel.
This guide is not intended for tenants.
Thank you for choosing Charter Communications
DTA INSTALLATION PROCESS & USER
GUIDE FOR CHARTER CONSUMER BULK TV

Cisco DTA 170HD Specifications

General

Type	Digital Transport Adapter
Category	Adapter
Input	RF coaxial
Remote Control	Included
Video Output	HDMI
Resolution Support	480i, 480p, 720p, 1080i
Video Resolution	Up to 1080i
Connectivity	HDMI

Summary

DTA Front and Back Panel Overview

DTA Front Panel

Diagram of the DTA front panel showing the Power LED status indicator.

DTA Back Panel

Diagram of the DTA back panel with connection ports and slide switch labeled.

Connecting the DTA

Connect Cable to Your DTA

Instructions for connecting the coaxial cable to the DTA input.

Connect the DTA to the TV

Steps for connecting the DTA to an HDTV or an analog TV.

DTA Setup and Remote Programming

Plug the Power Cord into the DTA

Guidance on connecting the DTA power cord to the power source.

Connecting the IR Extender

Instructions for connecting and positioning the IR Extender.

Power Up

Procedure for powering on the DTA and checking its status.

Program the Remote Control to the TV

Steps to program either a Universal Remote or a Cisco Remote for TV control.

DTA Configuration Settings

CLOSED CAPTIONS

Instructions for accessing and enabling Closed Captioning.

AUDIO LANGUAGE

Instructions for changing the audio language setting.

HDMI (APPLIES ONLY TO HDTVS CONNECTED VIA HDMI CABLE)

Configuring HDMI resolution and aspect ratio for HDTVs.

OUTPUT RESOLUTION (HDTVS ONLY)

Setting the screen format or output resolution for HDTVs.

CHANNEL LOCKS

Information and warnings about setting up Channel Locks and PINs.