Do you have a question about the Cisco EPC3212 and is the answer not in the manual?
DC-in jack | Yes |
---|---|
Modem (RJ-11) ports | 2 |
Ethernet LAN (RJ-45) ports | 1 |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 0 - 40 °C |
Operating relative humidity (H-H) | 0 - 90 % |
LED indicators | Link, Power |
Cables included | LAN (RJ-45), USB |
Internal | No |
Modulation | 128-QAM, 16-QAM, 32-QAM, 64-QAM, 8-QAM, QPSK |
Frequency range | 0.005 - 0.065 GHz |
Power consumption (typical) | 9.6 W |
Weight | 390 g |
---|---|
Dimensions (WxDxH) | 176 x 145 x 50 mm |
Servicing instructions for qualified personnel to reduce electric shock risk.
Ensure coaxial cable system is grounded to protect against surges and static.
Instructions for disconnecting power and signal inputs during lightning.
Warnings against overloading power outlets and cords to prevent fire/shock.
Warnings about liquids, moisture, and inserting objects into openings.
Caution against opening the product cover as it voids warranty and exposes dangerous voltages.
Overview of outstanding benefits and features of the VoIP cable modem.
Specifies minimum hardware and software for PC internet connectivity.
Specifies minimum hardware and software for Macintosh internet connectivity.
Lists requirements for establishing an Ethernet network connection.
Lists requirements for establishing a USB network connection.
Steps to set up a new internet account with a service provider.
Procedure for setting up telephone service with the cable modem.
Recommendations for choosing an ideal placement for the cable modem.
Instructions for mounting the cable modem horizontally on a wall.
Details the size and placement of slots for wall mounting.
Explains limitations on connecting devices based on Ringer Equivalent Number (REN).
Discusses compatibility and connection of different types of telephone devices.
Specifies that telephones should be set to DTMF dialing.
Outlines requirements for interior telephone wiring and distance limits.
Professional installation options and guidance for connecting devices.
Step-by-step installation procedure for data and telephone services.
Instructions for connecting a PC using an Ethernet cable.
Instructions for connecting a PC using a USB cable.
Step-by-step guide for installing USB drivers on Windows 2000.
Step-by-step guide for installing USB drivers on Windows XP.
Step-by-step guide for installing USB drivers on Windows Vista.
Procedure to renew IP address for Windows 2000/XP if internet access fails.
Procedure to renew IP address for Macintosh if internet access fails.
Steps to configure TCP/IP settings for Windows XP.
Steps to configure TCP/IP settings for Windows 2000.
Steps to configure TCP/IP settings for Macintosh.
Addresses common problems like status indicators and connection errors.
Offers tips to resolve performance issues and check connections.
Explains LED behavior during modem startup and network registration.
Describes the meaning of front panel LEDs during normal modem operation.
Lists registered trademarks of Cisco Systems and other companies.
Cisco's statement regarding responsibility for errors and right to change the guide.
Information subject to change; reproduction requires written permission.
Legal notice regarding the use and copying of software and firmware.