Cisco Linksys NSLU2 Quick Installation Guide

5
A Insert the Setup Wizard CD-
ROM into your PC’s CD-ROM
drive. The Setup Wizard
should run automatically,
and the Main Menu screen
should appear. If it does
not, click Start and then Run.
In the field provided, enter
D:\SetupUtility.exe (if “D” is
the letter of your CD-ROM
drive).
B Click the Setup button.
C The Setup Wizard will
automatically search for
any Network Storage Link
that is currently on your
network or attached to your
PC. If it fails to detect the
Network Storage Link or if an
Network Storage Link has
been installed since the
Setup Wizard’s last search,
click Search Again to
locate the Network Storage
Link.
Select the Network Storage
Link that you want to set up.
Then click the Yes button to
change any of the Network
Storage Link’s settings.
D You will be asked for your
password. For security
purposes, enter the current
password for the Network
Storage Link. The default is
admin. Click OK.
2
Set up the Network Storage Link
A
C
D

Cisco Linksys NSLU2 Specifications

General

Brand	Cisco
Model	Linksys NSLU2
Category	Network Hardware
Language	English