33
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Storage Tab - Media Server
Dual-Band Wireless-N Gigabit Router with Storage Link
to allow access to a group or the left arrows to remove access to a group. Click the Save Settings button to
save the changes. Click the Cancel Changes button to cancel the changes. Click the Close button to close
the screen.
Format Disk
For a blank disk, select the disk you want to format, then click the Format Disk button to format the disk and
create a partition.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For more information, click Help.
The Storage Tab - Media Server
The Router has a built-in media server, so it can stream music, pictures, or video from the USB hard disk to a
UPnP-compatible media adapter. The Media Server screen lets you scan for content.
Media Server
Setup
Server Name. The name of the Router is displayed here.
UPnP Media Server. To use the Router’s media server function, select Enable. Otherwise, select Disable.
Database
This section lets you select content to add to the database of the Router’s media server.
Specify Partitions to Scan. Click this button to select specific partitions to scan for content.
Scan All. Click this button to scan all partitions of the USB hard disk for content.
Auto scan every. Select Auto scan every to automatically scan, then select whether to scan every 12 Hours,
24 Hours, 36 Hours, or 48 Hours from the drop-down menu.
You can view the Partition and Folder of the USB hard disk. Select the Scan button to scan an item for content or
Delete to delete the partition from the Router’s database.
Figure 5-28: Storage Tab - Media Server
Figure 5-29: Media Folder
To Next Page
Loading...
Need help?
General
