37
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Storage Tab - Administration
Dual-Band Wireless-N Gigabit Router with Storage Link
Group Management
The groups are listed in the Group Management table. There are two default groups, Admin and Guest; these
cannot be deleted. Click the Create New Group button to create a new group.
If you click the Create New Groupbutton, the Group Account screen appears.
Enter the name and description for the group. Then, select Read and Write or Read Only from the Access
drop-down menu. Click the Save Settings button to save the new changes, or click the Cancel Changes
button to cancel the changes. Click the Close button to close the screen.
Each group you created on the Group Account screen will be listed with its access, which you can edit or delete.
Select the Edit button to edit a user or Delete to delete the user.
If you click the Edit button, the Group Account screen appears.
Enter a new Group Name or Description, then select Read and Write or Read Only from the Access drop-down
menu. Click the Save Settings button to save the changes, or click the Cancel Changes button to cancel the
changes. Click the Close button to exit the Group Account screen.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For more information, click Help.
Figure 5-34: Group Account
To Next Page
Loading...
Need help?
General
