Cisco Linksys WRT600N

Dual-Band Wireless-N Gigabit Router with Storage Link
List of Figures
Figure 3-1: The Router’s Back Panel 6
Figure 3-2: The Router’s Front Panel 7
Figure 3-3: The Router’s Top Panel 7
Figure 4-1: Connect the USB cable 8
Figure 4-2: Connect the internet 8
Figure 4-3: Connect the ethernet 8
Figure 4-4: Connect the power 8
Figure 5-1: Router Login 11
Figure 5-2: Setup Tab - Basic Setup (Automatic Configuration - DHCP) 11
Figure 5-3: Static IP 12
Figure 5-4: PPPoE 12
Figure 5-5: PPTP 13
Figure 5-6: Telstra Cable 14
Figure 5-7: L2TP 14
Figure 5-8: DHCP Reservation 16
Figure 5-9: Setup Tab - DynDDNS.org 17
Figure 5-10: Setup Tab - TZO.com 18
Figure 5-11: Setup Tab - MAC Clone 19
Figure 5-12: Setup Tab - Advanced Routing 20
Figure 5-13: Routing Table 21
Figure 5-14: Wireless Tab - Basic Wireless Settings 22
Figure 5-15: Wireless Tab - Wireless Security (WPA-Personal) 24
Figure 5-16: Wireless Security - WPA2-Personal 24
Figure 5-17: Wireless Security - WPA-Enterprise 25
Figure 5-18: Wireless Security - WPA2-Enterprise 25
Figure 5-19: Wireless Security - RADIUS 26
Figure 5-20: Wireless Security - WEP 26
Figure 5-21: Wireless Tab - Wireless MAC Filter 27
Figure 5-22: Wireless Client List 27
Figure 5-23: Wireless Tab - Advanced Wireless Settings 28
Figure 5-24: Security Tab - Firewall 30