SpecificationCharacteristic
100 VAC, 10AMaximum AC input current
35 A (cold turn on); 70 A (hot turn on)Maximum inrush current
Per power supply
• 1230 W
• 1230 W
Maximum output Watts
• For 200 to 277 VAC
• For 192 to 400 VDC
Per power supply
• 12 VDC at 100 A
• 12 VDC at 100 A
Power supply output voltage
• For 200 to 277 VAC
• For 192 to 400 VDC
12 V at 2.5 APower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
Efficiency rating
RSP1Form factor
930-W DC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PDC-930W-PE
• NXA-PDC-930W-PI
SpecificationCharacteristic
Nominal range: -48 to -60 VDC nominal (Range: -40
to -60 VDC
DC input voltage range
23 A at -48 VDCMaximum DC input current
930 WMaximum output power per power supply
35 A (sub-cycle duration)Maximum inrush current
8 ms at 930 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Greater than 92% at 50% loadEfficiency rating
RSP1Form factor
Cisco Nexus 93108TC-FX ACI Mode Hardware Installation Guide
50
System Specifications
930-W DC Power Supply Specifications
To Next Page
Loading...
