To Next PageTo Next Page
Need help?Do you have a question about the Cisco N9K-C93180YC-FX3 and is the answer not in the manual?
General| Product Model | N9K-C93180YC-FX3 |
|---|---|
| Manufacturer | Cisco |
| Category | Switch |
| Form Factor | 1 RU |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| VLAN IDs | 4096 |
| Operating System | Cisco NX-OS |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Ports | 48 x 25-Gbps SFP28, 6 x 100-Gbps QSFP28 |
| Latency | Sub-microsecond |
| Power Supply | Redundant |
| AC Power Input | 100 to 240 VAC |
| Humidity | 5 to 95% (noncondensing) |
| Dimensions | 1.72 x 17.3 x 22.5 inches |
Specifies the acceptable operating and non-operating temperature ranges for the switch.
Details the humidity levels the switch can withstand, both operating and non-operating.
States the maximum altitude rating for the switch's operation.
Outlines precautions to prevent dust contamination and its effects on the switch.
Explains the importance of grounding for voltage variation protection and methods.
Describes the necessary airflow direction for cooling and how to identify it.
Specifies the types of racks and cabinets suitable for switch installation.
Provides critical safety instructions and warnings before installation or servicing.
Details how rack-mount kits enable flexible switch positioning and installation.
Step-by-step guide for installing the switch with the NXK-ACC-KIT-1RU rack-mount kit.
Procedure for installing the switch using the N3K-C3064-ACC-KIT rack-mount kit.
Details the process and importance of grounding the switch chassis.
Covers the procedure for powering on and verifying the switch startup.
Guide for connecting Cisco Nexus 9300 leaf switches to APIC controllers.
Explains the requirement to connect each leaf to every spine switch for optimal forwarding.
