To Next PageTo Next Page
Need help?Do you have a question about the Cisco N9K-C93180YC-FX3H and is the answer not in the manual?
General| Model | N9K-C93180YC-FX3H |
|---|---|
| Product Type | Switch |
| Ports | 48 x 10/25G SFP28, 6 x 40/100G QSFP28 |
| Switching Capacity | 3.6 Tbps |
| Jumbo Frame Support | Up to 9216 bytes |
| Operating System | Cisco NX-OS |
| Memory | 16 GB |
| MTBF | 200, 000 hours |
| Power Supply | Dual Redundant Power Supplies |
| Power Consumption | 350W (max) |
| Operating Temperature | 0 to 40°C |
| MAC Address Table Size | 128K |
| Features | VXLAN |
| Dimensions (H x W x D) | 1.72 x 17.3 x 22.1 in |
Specifies the acceptable operating and non-operating temperature ranges for the switch.
Details the impact of humidity on the switch and its acceptable relative humidity ranges.
Explains the importance of proper grounding for switch protection against voltage variations.
Outlines the power supply options and considerations for the switch.
Details airflow direction options and how to identify them by module coloring.
Provides critical safety instructions and warnings before installing the switch.
Lists essential guidelines to follow during the switch installation process.
Step-by-step guide for installing the switch using a specific rack-mount kit.
Provides instructions for installing the switch with another specific rack-mount kit.
Explains how to properly ground the switch chassis for electrical safety.
Covers the procedure for powering on and starting the switch after installation.
Guides on connecting leaf switches to APIC controllers using virtual interface cards.
Explains how to connect leaf switches to spine switches for optimal fabric forwarding.
Details the typical and maximum power consumption of the switch.
Provides detailed specifications for the 650-W AC and 1200-W HVAC/HVDC power supplies.
