Cisco NCS 1002 User Manual

• Fan not detected
• Fan speed problem
• Power module fails
• Power module not detected
• Temperature of the device exceeds a threshold value
• Voltage of the device exceeds a threshold value
Step 1 admin
Enters system admin EXEC mode.
Example:
RP/0/RP0/CPU0:ios# admin
Step 2 show environment [all | fan | power | voltages | current | temperatures ] [ location | location]
Displays the environmental parameters of the NCS 1002.
Example:
The following example shows sample output from the show environment command with the fan keyword.
sysadmin-vm:0_RP0# show environment fan
Wed Nov 11 02:04:58.161 UTC
=====================================
Fan speed (rpm)
Location FRU Type FAN_0
-------------------------------------
0/FT0 NCS1K-FTA 4800
0/FT1 NCS1K-FTA 4800
0/FT2 NCS1K-FTA 4680
0/PM1 NCS1K-2KW-AC 8064
The table below lists the temperature threshold values for the different fan speeds.
Falling Min
Temperature (°C)
Falling Max
Temperature (°C)
Rising Max
Temperature (°C)
Rising Min
Temperature (°C)
Fan speed (rpm)
-1272728-1274800
282930295500
303536318500
3640413710500
4143444212500
441271274514500
The following example shows sample output from the show environment command with the temperatures keyword.
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
11
General Troubleshooting
Troubleshooting Environmental Parameters

Cisco NCS 1002 Specifications

General

Brand	Cisco
Model	NCS 1002
Category	Network Hardware
Language	English