Cisco NCS 1002 User Manual

Verifying the Firmware Version
The firmware on various hardware components of the NCS 1002 must be compatible with the installed Cisco
IOS XR image. Incompatibility might cause the NCS 1002 to malfunction.
Step 1 show hw-module fpd
Verify the firmware version. Displays the firmware information of various hardware components of the NCS 1002.
In Release 6.0.1, the following example displays the firmware information of various hardware components of the
NCS 1002.
Example:
RP/0/RP0/CPU0:ios# show hw-module fpd
Tue Apr 12 09:04:14.935 UTC
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
------------------------------------------------------------------------------
0/0 NCS1002 2.4 CDSP_PORT_05 CURRENT 3.56 3.56
0/0 NCS1002 2.4 CDSP_PORT_06 CURRENT 3.56 3.56
0/0 NCS1002 2.4 CDSP_PORT_12 CURRENT 3.56 3.56
0/0 NCS1002 2.4 CDSP_PORT_13 CURRENT 3.56 3.56
0/0 NCS1002 2.4 CDSP_PORT_19 CURRENT 3.56 3.56
0/0 NCS1002 2.4 CDSP_PORT_20 CURRENT 3.56 3.56
0/0 NCS1002 2.4 CDSP_PORT_26 CURRENT 3.56 3.56
0/0 NCS1002 2.4 CDSP_PORT_27 CURRENT 3.56 3.56
0/0 NCS1002 CFP2_PORT_05 NOT READY
0/0 NCS1002 2.0 CFP2_PORT_06 CURRENT 4.38 4.38
0/0 NCS1002 CFP2_PORT_12 NOT READY
0/0 NCS1002 CFP2_PORT_13 NOT READY
0/0 NCS1002 CFP2_PORT_19 NOT READY
0/0 NCS1002 2.1 CFP2_PORT_20 CURRENT 5.19 5.19
0/0 NCS1002 CFP2_PORT_26 NOT READY
0/0 NCS1002 CFP2_PORT_27 NOT READY
0/0 NCS1002 0.1 CTRL_BKP_LOW B CURRENT 1.22
0/0 NCS1002 0.1 CTRL_BKP_UP B CURRENT 1.22
0/0 NCS1002 0.1 CTRL_FPGA_LOW CURRENT 1.22 1.22
0/0 NCS1002 0.1 CTRL_FPGA_UP CURRENT 1.22 1.22
0/RP0 NCS1K-CNTLR-K9 0.1 BIOS_Backup BS CURRENT 13.10
0/RP0 NCS1K-CNTLR-K9 0.1 BIOS_Primary S CURRENT 13.10 13.10
0/RP0 NCS1K-CNTLR-K9 0.1 Daisy_Duke_BKP BS CURRENT 0.15
0/RP0 NCS1K-CNTLR-K9 0.1 Daisy_Duke_FPGA S CURRENT 0.15 0.15
In the above output, some of the significant fields are:
• FPD Device—Name of the hardware component such as FPD, CFP, and so on.
• ATR—Attribute of the hardware component. Some of the attributes are:
• B—Backup Image
• S—Secure Image
• P—Protected Image
• Status—Upgrade status of the firmware. The different states are:
• CURRENT—The firmware version is the latest version.
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
16
General Troubleshooting
Verifying the Firmware Version

Cisco NCS 1002 Specifications

General

Brand	Cisco
Model	NCS 1002
Category	Network Hardware
Language	English