Cisco NCS 1002 User Manual

If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html for more information or log into http://www.cisco.com/c/
en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free Technical Support numbers for
your country.
RM-DEVICE-OUT-OF-TOL Alarm
Default Severity: Minor (MN), Non-Service Affecting (NSA)
Logical Objects: FT
The RM-DEVICE-OUT-OF-TOL alarm is raised on the NCS 1002 when the fan is malfunctioned and is not
working properly.
Clear the RM-DEVICE-OUT-OF-TOL Alarm
Replace the malfunctioned fan.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
SIGLOSS Alarm
Default Severity: Major (MJ), Service-Affecting (SA)
Logical Objects: CLIENT
The Signal Loss on Data Interface alarm is raised on the client-side QSFP of the NCS 1002 when there is a
loss of Ethernet signal.
Clear the SIGLOSS Alarm
Step 1 Ensure that the port connection at the near end of the client peer router is operational.
Step 2 Verify fiber continuity to the port.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html for more information or log into http://www.cisco.com/c/
en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free Technical Support numbers for
your country.
SYNCLOSS Alarm
Default Severity: Major (MJ), Service-Affecting (SA)
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
68
Alarm Troubleshooting
RM-DEVICE-OUT-OF-TOL Alarm

Cisco NCS 1002 Specifications

General

Brand	Cisco
Model	NCS 1002
Category	Network Hardware
Language	English