Cisco NCS 5504 User Manual

Figure 46: Removing a Bale Clasp SFP or SFP+ Module
Step 5 Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if you plan to return
it to the factory.
Step 6 Protect your line card by inserting a clean SFP module cage covers into the optical module cage when there is no SFP
module installed.
Hardware Installation Guide for Cisco NCS 5500 Series Modular Routers
85
Connect Router to the Network
Remove a Bale Clasp SFP or SFP+ Module

Cisco NCS 5504 Specifications

General

Brand	Cisco
Model	NCS 5504
Category	Network Router
Language	English