Figure 25: Removing a Bale Clasp SFP or SFP+ Module
Step 5
Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if you plan to return
it to the factory.
Step 6
Protect your line card by inserting clean SFP module cage covers into the optical module cage when there is no SFP
module installed.
Hardware Installation Guide for Cisco NCS 5500 Series Fixed-Port Routers
44
Connect Router to the Network
Installing and Removing SFP Modules
To Next Page
Loading...
Need help?
General
