Verifying the NBM Configuration
To display the NBM configuration information, perform one of the following tasks:
PurposeCommand
Displays the uplink interfaces for each NBM (S,G)
or (*,G) flow.
show ip mroute
Displays the configured and applied NBM bandwidth
per flow.
show nbm flows bandwidth
Displays the NBM running-configuration information.show running-config | grep nbm
Displaying NBM Flows and Flow Statistics
To display the NBM flows and flow statistics, perform one of the following tasks:
PurposeCommand
Displays the current NBM flows in the IP fabric. The
flows are ordered by their startup time, with the most
recent first.
The all option shows the following information for
expired flows: end time, total number of packets or
bytes, and average flow rate.
show nbm flows [all]
Displays the NBM flow statistics.show nbm flows statistics
The following example shows sample output for the show nbm flows command:
switch# show nbm flows
NBM Active flow(s)
Start-Time Src-Port Mcast-Group Src-IP L4-S L4-D
06/17 01:27:11. 53 Eth1/2 225.0.0.9 192.168.102.2 1024 1024
06/17 01:27:11. 52 Eth1/2 225.0.0.8 192.168.102.2 1024 1024
06/17 01:27:11. 51 Eth1/2 225.0.0.7 192.168.102.2 1024 1024
06/17 01:27:11. 50 Eth1/2 225.0.0.6 192.168.102.2 1024 1024
06/17 01:27:11. 50 Eth1/2 225.0.0.4 192.168.102.2 1024 1024
06/17 01:27:11. 50 Eth1/2 225.0.0.3 192.168.102.2 1024 1024
06/17 01:27:11. 49 Eth1/2 225.0.0.2 192.168.102.2 1024 1024
06/17 01:27:11. 49 Eth1/2 225.0.0.1 192.168.102.2 1024 1024
06/17 01:27:11. 49 Eth1/2 225.0.0.0 192.168.102.2 1024 1024
The following example shows sample output for the show nbm flows statistics command:
switch# show nbm flows statistics
NBM Flow Statistics
Cisco Nexus 9000 Series NX-OS IP Fabric for Media Solution Guide, Release 7.0(3)I4(2)
14
Configuring IP Fabric for Media
Verifying the NBM Configuration
To Next Page
Loading...
