Planning How to Position the Chassis in the Rack 15
Installing the Chassis in a Two-Post Rack 16
Attaching Center-Mount Brackets to the Chassis 16
Installing the Chassis in a Two-Post Rack 17
Installing the Chassis in a Four-Post Rack 19
Installing the Switch using the N9K-C9300-RMK Rack-mount Kit 19
Attaching the Bottom-Support Rails to the Rack 19
Attaching Front-Mount Brackets to the Chassis 21
Installing the Chassis in a Four-Post Rack 22
Grounding the Chassis 24
Starting the Switch 26
Connecting the Switch to the ACI Fabric 29
CHAPTER 4
ACI Fabric Topology 29
Preparing to Connect to Other Devices 30
Connecting Leaf Switches to APICs 31
Connecting Leaf Switches to Spine Switches 32
Installing a Gigabit Ethernet module (GEM) 34
Virtual Port Channel Migration - Migration of Nodes from a First-Generation Switch to a
Second-Generation Switch 34
Setting Up an Optional Console Interface 35
Setting Up an Optional Management Connection 36
Optic Transceiver Removal Using the Optics Extraction Tool 36
Maintaining Transceivers and Optical Cables 37
Replacing Components 39
CHAPTER 5
Replacing a Fan Module During Operations 39
Replacing a Power Supply Module 40
Removing an AC Power Supply 40
Removing an HVAC/HVDC Power Supply 41
Removing a DC Power Supply 41
Installing an AC Power Supply 42
Installing an HVAC/HVDC Power Supply 43
Installing a DC Power Supply 44
Cisco Nexus 93216TC-FX2 ACI-Mode Switch Hardware Installation Guide
iv
Contents
To Next Page
Loading...
