Cisco Nexus 93600CD-GX Series - 1100-W DC Power Supply Specifications; Power Cable Specifications; Power Cable Specifications for AC Power Supplies

SpecificationCharacteristic
35A (cold turn on); 50A (hot turn on)Maximum inrush current
1100W @ 100 – 277VAC, 240VDC – 380VDCMaximum continuous total output
power
12V/ 90AOutput voltage
3.3V/ 3AStandby output voltage
80 Plus PlatinumEfficiency
1100-W DC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PDC-1100W-PE
• NXA-PDC-1100W-PI
SpecificationCharacteristic
Nominal range: -54VDC (Range: -40 to -72 VDC)DC input voltage range
32 A at -40 VDCMaximum DC input current
1100 WMaximum output power per power
supply
90 A (cold turn on)Maximum inrush current
4 ms at 100% loadMaximum hold-up time
12 V/ 90APower supply output voltage
3.3 V/ 3APower supply standby voltage
94% at 50% loadEfficiency rating @ -48VDC
Power Cable Specifications
The following sections specify the power cables that you can order and use with this switch.
Power Cable Specifications for AC Power Supplies
Cord Set DescriptionPower Cord Part NumberLocale
Power Cord Jumper, C13-C14 Connectors, 6.6 feet
(2.0 m)
CAB-C13-C14-2M
Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide
54
System Specifications
1100-W DC Power Supply Specifications