14 Cisco Small Business NSS324 and NSS326 Smart Storage
System Configuration Using the Windows Setup Wizard
After connecting the equipment and pressing the Power button, the
system takes a few minutes to initialize. Listen for one beep. Wait a minute
until you hear a second beep. The power light will turn solid green. The
NAS device has started successfully and you can configure the device
using the First Time Installation Wizard.
NOTE If you receive Windows firewall warnings during this process, you
may need to allow the installation application to unblock the firewall
settings. If the installation does not start, you may also have to temporarily
disable any security software on your computer to run the Setup Wizard.
STEP 1 Insert the product CD. The Welcome to the Setup Wizard window
opens.
STEP 2 Under First Time Installation, click Start. The End-User License
Agreement window opens.
STEP 3 To accept the End-User License Agreement, check the I accept
this agreement check box and click Next. The First Time
Installation Wizard window opens.
STEP 4 Click Next to run the wizard.
STEP 5 From the Hardware Installation Guide window, select your model.
STEP 6 Follow the prompts to check the package contents, install the disk
drives, and connect the equipment.
NOTE If you have already installed the disk drives and connected
the equipment, click Skip until you reach the System Configuration
window.
STEP 7 From the System Configuration window, click Next to go to NAS
configuration. The NAS Configuration window opens.
STEP 8 Click Next. The Discovering the NAS window opens and advises
when the uninitialized device is found.
NOTE If your device is already configured, click Skip to go to Map
Network Drive. See Mapping a Network Drive, page 24.
STEP 9 Click Next. The Web Configuration window opens.
STEP10 The First Time Installation Wizard detects the NAS and prompts
you to go through the web configuration process. From the drop-
down list, select a NAS device.
STEP11 Click Next to continue. You are directed to a configuration window
to complete the settings step by step. The Welcome window
displays.
To Next Page
Loading...
