Cisco Stealthwatch - User Manual

Cisco Stealthwatch
Data Store Hardware Deployment and Configuration Guide 7.3.2

Summary

Data Store Deployment Prerequisites and Recommendations

Data Store Networking and Switching Considerations

Details network and switching considerations for Data Store deployment.

Data Store Installation

Data Store Initial Deployment and Configuration

Steps for deploying and configuring Data Nodes for the Data Store.

Data Store Initialization and Configuration

Procedures to initialize and configure the Data Store after deployment.

Data Store Maintenance

Creating a Data Store Backup

Guides on estimating storage and preparing hosts for Data Store backups.

Restoring a Data Store Backup

Procedures to stop the Data Store and restore from a backup.

Data Store Deployment Troubleshooting

Vertica Analytics Platform does not automatically restart after a Data Node loses power and reboots

Addresses Vertica not restarting after a Data Node power loss.

Appendix B. Stealthwatch Hardware Installation

Configuring Network Settings Using First Time Setup

Guides on configuring network settings and IP addresses using First Time Setup.

Data Node Configuration

Configuration steps specific to Data Nodes, including port setup.

Appendix C. Configuring Your Appliances

1. Log In

2. Configure the Appliance

3. Register the Stealthwatch Management Console

Cisco Stealthwatch Specifications

General

Brand	Cisco
Model	Stealthwatch
Category	Storage
Language	English