l
IP Address Ranges (SMC only): Select the IP address range for your
Stealthwatch network.
4. DNS Settings: Confirm the default is correct, or enter your domain server IP
address. Click Next.
Add or Delete DNS Servers (optional):
l
Add:Click the + icon.
l
Delete:Click the check box to select the DNS server. Click the - icon.
5. NTP Settings:Confirm the default is correct, or click the Menu icon to select
your network time protocol (NTP) server. Click Next.
l
Multiple NTP Servers:We recommend setting up multiple NTP servers for
redundancy and accuracy.
l
Public Source: pool.ntp.org is a good, public source for NTP.
Add or Delete NTP Servers (optional):
l
Add:Click the + icon.
l
Delete:Click the check box to select the NTP server. Click the - icon.
6. If the appliance is an SMC, go to 3. Register the Stealthwatch Management
Console.
If the appliance is not an SMC, go to 4. Add Appliances to Central
Management.
3. Register the Stealthwatch Management Console
1. Review Your Settings:Confirm the appliance information is accurate.
2. Click Apply or Restart and Proceed.
Follow the on-screen prompts while the appliance restarts.
Wait a few minutes for your new system settings to take effect. You may need to
refresh the page.
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - 88 -
Appendix C. Configuring Your Appliances