as Up before you start the Flow Sensor
configuration.
9.
Secondary SMC
(if used)
Make sure the primary SMC is shown as
Up before you start the secondary SMC
configuration.
The secondary SMC selects itself as
Central Manager. Configure Failover
after all appliances are configured.
Your system might not have all the appliances shown here.
1. Log In
Use the following instructions to configure each appliance using the Appliance Setup
Tool.
1. In the address field of your browser, type https:// followed by the IP address of
the appliance.
l
Primary SMC: Configure the primary SMC first.
l
Up: Confirm each appliance is Up before you start configuring the next
appliance in your cluster.
l
Order: Make sure you configure your appliances in order so they
communicate correctly.
2.
Enter the following credentials to log in:
l
User Name: admin
l
Password: lan411cope
2. Configure the Appliance
When you log in to the appliance for the first time, the Appliance Setup Tool guides you
through each configuration step.
1. Change Default Password: Enter new passwords for admin, root, and sysadmin.
Click Next to scroll to each user.
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - 86 -
Appendix C. Configuring Your Appliances
To Next Page
Loading...
Need help?
General
