Stealthwatch with a Data Store Deployment
Overview
The following describes the high-level steps for deploying Stealthwatch with a Data
Store:
1. SMC Configuration for Use with a Data Store - Deploy and configure your SMC,
then install the latest version and rollup patch before you proceed.
2. Data Store Initial Deployment and Configuration - Deploy and configure your
Data Nodes, then install the latest version and rollup patch on each before you
proceed.
3. Flow Collector Configuration for Use with a Data Store - Deploy and configure
your Flow Collectors, then install the latest version and rollup patch on each
before you proceed.
4. Data Store Initialization and Configuration - Initialize the Data Store, assigning
Data Store user passwords.
5. Flow Interface Statistics Retention Configuration - Configure Data Store retention
settings.
6. Data Store Next Steps
In addition, see the following section for optional Stealthwatch components:
l
UDP Director (Optional) Deployment
l
Flow Sensor (Optional) Deployment
l
Failover Stealthwatch Management Console (Optional) Deployment
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - 25 -
Stealthwatch with a Data Store Deployment Overview
To Next Page
Loading...
